MODEL NO. PE-125H PFAUTER 6-AXIS “CNC”

MODEL NO. PE-125H PFAUTER 6-AXIS “CNC”

$189,500 (USD)

orCall 513-771-1952

Description

MODEL NO. PE-125H PFAUTER 6-AXIS “CNC” HORIZONTAL GEAR HOBBING MACHINE SERIAL NO. 27850 (NEW 1995) SUITABLE FOR THE HOBBING OF GEARS, PINIONS, SPLINES, AND OTHER WORK-PIECES OF SIMILAR TYPE AND PROFILE UP TO 5.1” (130MM) DIAMETER, 31.49” (800MM) FACE-WIDTH, WITH 6 DP (4 MODULE) CUTTING CAPABILITY EQUIPMENT / FEATURES: BASE MACHINE RIGID BED, INCLUDING INTERNAL COOLANT RESERVOIR MAIN AXIAL SLIDE, INCLUDING INTEGRAL RADIAL SLIDE HOB HEAD WITH TANGENTIAL SLIDE, INCLUDING QUICK CLAMPING OF HOB ARBOR AND OUTBOARD SUPPORT BEARING CNC CONTROLLED HOB HEAD SWIVEL (A-AXIS), INCLUDING HYDRO-MECHANICAL CLAMPING AND UNCLAMPING WORK TABLE, INCLUDING TWO (2) START, DOUBLE WORM GEAR DRIVE SPLASH GUARDS TAILSTOCK, INCLUDING MOTORIZED POSITIONING AND HYDRAULIC ACTUATED QUILL MAGNETIC CHIP CONVEYOR 22” DISCHARGE HEIGHT WITH CHIP BOX CONTROL & SOFTWARE GE FANUC SERIES 15 CNC PROGRAMMABLE CONTROLLER IN SIX (6) AXES EXECUTION, WITH GEAR HOBBING SOFTWARE, 14” COLOR CRT, CONVERSATIONAL DIALOGUE, INCLUDING CUSTOM MACRO, TOOL-OFFSET, AND 320 METERS PART PROGRAM STORAGE SHARED BY MENU ELECTRONIC HAND-WHEEL FOR MOVEMENT OF ALL CNC-CONTROLLED MOTIONS RADIAL (X) TANGENTIAL (Y) HOB SWIVEL (A) HOB SPINDLE (B) AXIAL (Z) WORK TABLE (C) GE FANUC HIGH PERFORMANCE DIGITAL AC SERVO DRIVES FOR ALL AXES GE FANUC AC, MICROPROCESSOR CONTROLLED SPINDLE DRIVE SYSTEM UNIVERSAL MENU PARTS PROGRAM WITH DATA INPUT, METRIC OR INCH, OF WORKPIECE, HOB AND CYCLE DATA, INCLUDING FOLLOWING FEATURES: FULLY AUTOMATIC SETUP OF ALL AXIS POSITIONS, INCLUDING APPROACH CALCULATION, OVERTRAVELS, HOB HEAD SWIVEL POSITION, ETC. RADIAL, AXIAL AND COMBINED RADIAL-AXIAL HOBBING TWO CUT CYCLE FOR RADIAL CUTTING, INCLUDING FEED AND SPEED SELECTIONS FOR EACH CUT TWO-CUT CYCLES FOR AXIAL OR COMBINED RADIAL-AXIAL CUTTING, INCLUDING FEED AND SPEED SELECTIONS, AND SAME OR ALTERNATING FEED DIRECTIONS FOR EACH CUT TAPER HOBBING FOR ALL OF THE COMBINATIONS ABOVE SYMMETRICAL CROWN HOBBING FOR SMALL AMOUNTS OF CROWNING, INCLUDING ALL OVER-TRAVELS AS REQUIRED TAPER AND CROWN HOBBING EACH REQUIRE ONLY ONE ADDITIONAL MENU INPUT AUTOMATIC HOB SHIFTING PROGRAM, INCLUDING SELECTION FOR MAXIMUM AND MINIMUM HOB POSITION, SHIFT INCREMENT AND FREQUENCY OF WORKPIECES CUT PER HOB SHIFT. SMALLEST PROGRAMMABLE SHIFT INCREMENT IS 0.001 MM (0.0001”.) OPERABLE WITH OR WITHOUT POWER CLAMPING OF WORKPIECE OPERABLE WITH OR WITHOUT TAIL-CENTER DWELL SELECTION OF 1-99 WORKTABLE REVOLUTIONS FOR ALL CYCLE COMBINATIONS MENU INPUT EITHER METRIC OR INCH MANUAL AND AUTOMATIC CONTROL MODES, SAFETY INTERLOCKS, LUBRICATION CONTROL AND MONITORING, ETC DIAGNOSTIC MESSAGES AND “SEARCH MONITOR” FOR TROUBLE SHOOTING ADDITIONAL MACHINE EQUIPMENT HYDRAULIC AND LUBRICATION SYSTEM WITH ATTACHED TANK WITH MANIFOLD MOUNTED SOLENOID VALVES POWER FORCED LUBRICATION RECIRCULATION OF HOB HEAD AND WORK TABLE PROGRESSIVE GUIDEWAY LUBRICATION SYSTEM, INCLUDING SEPARATE ATTACHED TANK STANDARD ELECTRICAL EQUIPMENT INCLUDES MAIN DISCONNECT, STARTERS, RELAYS LIMIT SWITCHES, COMPACT ATTACHED ELECTRICAL ENCLOSURE, ETC. ELECTRICAL WIRING FOR CONNECTION TO 460 VAC, +/-10%, 3 PHASE, 60 HERTZ AND TOTAL CONNECTED LOAD RATING @ 50 KVA AUXILIARY AC MOTORS FOR HYDRAULIC AND LUBRICATION SYSTEMS, CHIP REMOVAL, ETC. ABSOLUTE DIGITAL POSITION MEASUREMENT SYSTEMS ON ALL AXES ONE (1) HOB ARBOR MACHINE LEVELING SHOES PRICE: Ex-Works (Ex-Site) present plant location $189,500.00 ON SITE BEFORE REMOVAL...........$189,500 Monthly Payments Starting At:....$3795.68 Call Us at: 513-771-1952 Conditions of Sale RAPID TRAVERSE RATES: SPACE REQUIREMENTS WITH CHIP-BOX AND DOORS OPEN:

Specifications

Year1995
ConditionUsed
Serial Number27850.0
Stock NumberLTC1298
Pitch rating, application dependent6 DP (4 MODULE)
Maximum workpiece diameter5.1” (130MM)
Workpiece swing18.9” (480MM)
Maximum axial slide travel31.5” (800MM)
Work table face to tailstock55.1” (1400MM)
Minimum center distance workpiece/hob0.4” (10MM)
Maximum center distance workpiece/hob7.3” (185MM)
Maximum hob diameter8.7” (220MM)
Maximum hob shift travel6.7” (170MM)
Maximum hob head swivel angle-45º (LH) /+45º (RH)
Hob swivel angle for hob change90º
Work table bore inside diameter (h6)2.4” (63MM)
Work spindle thru-bore diameter1.75” (44.45MM)
Maximum work table rotation80 RPM
Number of starts of work table worm2
Taper in hob spindleISO 40
Hob spindle motor power (100%)10 HP (7.5 KW)
Hob spindle speed range, (infinitely variable)150-600 RPM
* axial236 IPM (6,000 MMP)
* radial197 IPM (5,000 MMPM)
* tangential118 IPM (3,000 MMPM)
Coolant tank capacity111 GAL (420 LITRES)
* pump flow rate66 GPM (250 LPM)
Length142” (3600MM)
Width165” (4200MM)
Height87” (2200MM)
Machine weight (approximate)15,450 LBS (7,000 KGS)