#116 GLEASON HYPOID SPIRAL BEVEL GEAR

#116 GLEASON HYPOID SPIRAL BEVEL GEAR

$24,500 (USD)

orCall 513-771-1952

Description

#116 GLEASON HYPOID SPIRAL BEVEL GEAR Generator SERIAL NO. 663712, MODEL 116 NOTE: SUITABLE FOR CUTTING OF AUTOMOTIVE-TYPE HYPOID AND SPIRAL BEVEL PINIONS UP TO 10:1 RATIO, 9" (228.6MM) CONE DISTANCE, AND A MAXIMUM OF 2 DP MODULE 12.7) EQUIPMENT / FEATURES: - HYDRAULIC DOUBLE-ACTING CHUCKING MECHANISM LESS DRAW-IN BAR & NUT - MODIFIED ROLL FEATURE - FEED & ROLL CAM #R43210960 - STOCK DIVIDING GAUGE - ASSORTED EXTRA CHANGE GEARS - WORK SPINDLE ADAPTER (60 TAPER TO 39 TAPER STEP-DOWN) - FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) - SELF CONTAINED HYDRAULIC SYSTEM - SELF CONTAINED COOLANT SYSTEM - ONE SINGLE SET-UP OF CHANGE GEARS FOR ONE OPERATION AS LAST PERFORMED ON THE MACHINE. PRICE: F.O.B. OUR WAREHOUSE

Specifications

Model116.0
ConditionUsed
Serial Number663712.0
Stock NumberTW265
Maximum full depth1" (25.4MM)
Cone distance, maximum(30-DEGREE
Sprial angle & 12" diameter cutter9" (30MM)
Max pitch angle (shafts at 90-deg)84 DEGREES 18'
Min pitch angle (shafts at 90-deg)5 DEGREES 42'
Extreme ratio (shafts at 90-deg)10 TO 1
Operate with "formate" gears2 TO 1
10 to 1 ratio18" (460MM)
2 to 1 ratio16" (406MM)
1 to 1 ratio12.75" (324MM)
Max face width (depending on cutter)2.75" (78MM)
Max./min. number of teeth175 TO 5
Work spindle taper bore dia.(large end)3.9" (100MM)
Depth of taper6" 150MM)
Diameter of hole through spindle3.06" (78MM)
Diameter of spindle nose5.5" (140MM)
Cutter diameters utilized(150,190,230,305MM)
Workhead max offset above center4.5" (114MM)
Workhead max offset below center4.5" (114MM)
To nose of spindle2.5" (63MM)
Cutter speeds20 TO 115 RPM
Feeds (seconds per tooth)9 TO 80 SECONDS
Feed motor5 HP 1800 RPM
Hydraulic motor.75 HP 1800 RPM
Coolant motor.5 HP 3600 RPM
Floor space(1905 X 2896MM)
Machine net weight(10,773 KGS)