641 GLEASON “G-PLETE” HYPOID SPIRAL BEVEL GEAR GENERATING MACHINE
641 GLEASON “G-PLETE” HYPOID SPIRAL BEVEL GEAR GENERATING MACHINE
$39,500 (USD)
Description
641 GLEASON “G-PLETE” HYPOID SPIRAL BEVEL GEAR GENERATING MACHINE NEW 1980, SERIAL NO. 763305, MODEL 641, SERIES G-PLETE SUITABLE FOR THE “COMPLETING” OF SPIRAL BEVEL, HYPOID, AND ZEROL BEVEL GEARS AND PINIONS UP TO 16” (406.4MM) DIAMETER, 2.6” (66MM) FACE-WIDTH, WITH 2 DP (MODULE 12.7) CUTTING CAPABILITY FEATURES / EQUIPMENT: HYDRAULIC CHUCKING ATTACHMENT LESS/DRAW-ROD & NUT ARRANGEMENT FOR FORMATE, INCLUDING CONTROLS FOR COMPLETING, ROUGHING & FINISHING PLUNGE FEED MECHANISM VARIABLE RATE-OF-ROLL ARRANGEMENT HELICAL MOTION FEATURE DOUBLE-ROLL ARRANGEMENT RATIO CONTROL MECHANISM ONE SINGLE SET-UP OF CHANGE GEARS FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) COOLANT SYSTEM, PUMP TANK & PIPING AUTOMATIC CHIP SEPARATOR, INCLUDING AUTOMATIC CHIP WIPER SYSTEM AND AUGER-TYPE CHIP CONVEYOR PRICE: F.O.B. OUR WAREHOUSE
Specifications
| Model | 641.0 |
| Year | 1980 |
| Condition | Used |
| Serial Number | 763305.0 |
| Stock Number | 28074 |
| Root angle range | -8° TO 90° |
| Gear diameter – maximum | 16.000" (406.40MM) |
| At the following ratios | (USING 12” CUTTERS) |
| 1 x 1 | 13.500" (342.90MM) |
| 2 x 1 | 16.000" (406.40MM) |
| 5 x 1 | 16.000" (406.40MM) |
| Maximum radial setting | 6.983" (177.40MM) |
| Diametral pitch – coarsest | 2.0 DP (12.70 MOD) |
| Full depth – maximum | 1.000" (25.40MM) |
| Face width – maximum | 2.600" (66.00MM) |
| Index range | 5 TO 10 INCLUSIVE |
| At large end | 3-29/32" (99.22MM) |
| Taper per foot | 39/64” (15.48MM) |
| Depth of taper | 6" (152.40MM) |
| Diameter of hole through spindle | 3.0625" (77.79MM) |
| Cycle time infinitely variable from | 4.5 SECONDS/TOOTH – MINIMUM |
| Offset above centre - maximum | 2.25" (57.15MM) |
| Machine centre to nose of spindle – maximum | 14.50” (368.30MM) |
| Electrical equipment | 60 HZ (50 HZ) |
| Cutter drive motor | (10/5 HP) 1800/900 RPM (1500/750 RPM) |
| Hydraulic motor | (5 HP) (1500 RPM) |
| Coolant motor | (2 HP) (1000 RPM) |
| D.c. generating drive motor | (6 HP) 1200 RPM |
| Electrical panel & chip removal system) | 131” X 85” (333 X 216CM) |
| Height | 83” (211CM) |