MODEL NO. 6 GLEASON COMBINATION HAND ROLLING

MODEL NO. 6 GLEASON COMBINATION HAND ROLLING AND POWER ANGULAR HYPOID BEVEL GEAR TESTER SERIAL NO. 22043 SUITABLE FOR THE TESTING OF BOTH THE ROLLING QUALITIES, AND THE TOOTH SPACING AND CONCENTRICITY OF BEVEL AND HYPOID GEARS OF ANY SHAFT ANGLE UP TO 7.5" (190.5MM) DIAMETER EQUIPMENT / FEATURES: STANDARD TWO-SPEED, 2-HP/1-HP, 440 VOLT, 3-PHASE 50/60 CYCLE, 1800/3600 RPM DRIVE MOTOR W/PULLEYS & BELTS TWO-SPEED DRUM SWITCH FORWARD/REVERSE SPINDLE ROTATION MANUAL BRAKING SYSTEM FOR LOAD SIMULATION SPRING CHUCKING MECHANISM (BOTH SPINDLES) (LESS/DRAW-RODS & NUTS) STANDARD 1-51/64” DIAMETER PINION SPINDLE BORE (#12-TAPER) STANDARD 1-51/64” DIAMETER GEAR SPINDLE BORE (#12-TAPER) FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) GUARDS, COVERS PRICE: F.O.B. OUR WAREHOUSE Maximum diameter of gears: 7.5" (190.5MM) Range of angles: 0 TO 180 DEGREES To nose of gear spindle: 7"/0" (177.8/0MM) To nose of pinion spindle: 7"/1" (177.8/25.4MM) Diameter of spindle hole (large end): 1-51/64" (45.64MM) Taper of spindle per ft.: 1/2" (12.7MM) Depth of taper: 3" (76.2MM) Diameter of hole through: 1-5/16" (33.337MM) Floor space required: 37" X 42" (940X1067MM) Machine net weight: 1,900 LBS. (863.6 KGS)