#14 GLEASON UNIVERSAL ANGULAR BEVEL TESTING MACHINE

#14 GLEASON UNIVERSAL ANGULAR BEVEL TESTING MACHINE SERIAL NO. 602603, MODEL 14 SUITABLE FOR THE RUNNING TESTING/CHECKING FOR SMOOTHNESS AND QUIETNESS OF OPERATION AND INSPECTION OF ACTUAL TOOTH CONTACT, UNDER LOAD, (TOOTH BEARING), ON A WIDE VARIETY OF STRAIGHT AND CURVED TOOTH BEVEL GEARS OF ANY SHAFT ANGLE, INCLUDING HYPOID, SPUR, HELICAL, INTERNAL GEARS, AS WELL AS WORM AND WORM-WHEEL COMBINATIONS UP TO 20" (508MM) DIAMETER. EQUIPMENT / FEATURES: 4 SPEED MAIN DRIVE MOTOR W/DRUM SWITCH SPEED SELECTOR 2-STEP DRIVE PULLEY FORWARD/REVERSE DIRECTION SPINDLE ROTATION VIA PUSH BUTTON DOUBLE COMPOUND ADJUSTABLE GEAR-SPINDLE SLIDE OVER-ARM BRACKET (LESS OVER-ARM & OUTER ARBOR BEARING SUPPORT) FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) HAND-WHEELS, GUARDS, COVERS PRICE: F.O.B. OUR WAREHOUSE Maximum diameter gear (nominal): 20" (508MM) Range of shaft angles: 0 TO 180 DEGREES Above center: 4.5" (114.3MM) Below center: 4.5" (114.3MM) To machine centerline: (-127MM/+330.2MM) Gears)- away from operator: 9" (228.6MM) Bore diameters (large end): 3-29/32" (99.218MM) Bore taper(s), per ft.: 39/64" (15.478MM) Depth(s) of taper: 6" (152.4MM) Thru-bore diameter(s): 1.468" (37.306MM) Spindle(s), 8 speeds: 400 TO 1500 RPM Main drive motor hp at 1800 rpm: 7.5 HP Main drive motor hp at 1200 rpm: 5 HP Main drive motor hp at 900 rpm: 3.75 HP Main drive motor hp at 600 rpm: 2.5 HP Approx machine overall dimensions: (1651X1905X1651MM) Approx machine net weight: 4,550 LBS (2,068 KG)