25"/34" X 80" SOUTH-BEND "NORDIC-25" GAP-TYPE ENGINE LATHE W/TAPER & SONY DIGITAL READOUTS
Sold
25"/34" X 80" SOUTH-BEND "NORDIC-25" GAP-TYPE ENGINE LATHE W/TAPER & SONY DIGITAL READOUTS
$19,500 (USD)
Description
25"/34" X 80" SOUTH-BEND "NORDIC-25" GAP-TYPE ENGINE LATHE W/TAPER & SONY DIGITAL READOUTS MODEL NORDIC 25, EQUIPPED WITH: SONY DIGITAL READOUTS TAPER ATTACHMENT 24" 4-JAW CHUCK INCH-METRIC THREADING #D1-8 CAMLOCK SPINDLE NOSE F.O.B. OUR WAREHOUSE
Specifications
| Model | NORDIC 25 |
| Condition | Used |
| Serial Number | 315D67GT1072 |
| Stock Number | 29419 |
| Hole thru spindle | 2.8" |
| Swing over bed ways, rated | 25" |
| Swing thru gap, rated | 34" |
| Swing over cross-slide | 15.75" |
| Distance between centers | 80" |
| Tailstock, spindle taper | #5 MT |
| Tailstock, spindle travel | 7.875" |
| (18) spindle speeds, range | 18 TO 1400 RPM |
| (25) carriage longitudinal feeds | .0028 TO .045 IPR |
| (25) cross feeds, range | .0014 TO .0225 IPR |
| Inch thread changes, range | .273 TO 64 TPI |
| Metric thread changes, range | .625 TO 128 MM |
| Motor horsepower | 15 HP |
| Floor space required, l x d | 200" X 42" |
| Overall height | 59" |
| Weight, approximately | 9500 LBS |