25" x 84" TOOLMEX "TUR630A" HOLLOW-SPINDLE DUAL-CHUCK ENGINE LATHE

25" x 84" TOOLMEX HOLLOW-SPINDLE DUAL-CHUCK ENGINE LATHE
New 2003, Serial No 030023, Model TUR630A,

EQUIPPED WITH:
5.5" Hollow-Spindle Design
Dual-Chucks w/Rear Nose Option
20" 4-Jaw Chuck w/Jaws (Front)
15.5" 3-Jaw Chuck w/Jaws (Rear)
Taper Attachment
Threading (Inch-Metric Full-Length Lead Screw)
Steady Rest - Tool Post

CATALOG SPECIFICATIONS:
Hole Thru Spindle..................................... 5.5"
Swing Over Bed Ways, Rated.................. 25"
Swing Over Cross-Slide.......................... 14.6"
Distance Between Centers..................... 84"
Tailstock, Spindle Taper.......................... #5 MT
(21) Spindle Speeds, Range.................... 15 to 1400 RPM
(42) Carriage Longitudinal Feeds, Range .0031 to .121 IPR
(42) Cross-Slide Cross Feeds, Range..... .0016 to .060 IPR
(42) Inch Thread Changes, Range............ 1 to 88 TPI
(42) Diametral Thread Changes, Range... 1 to 88 DP
(42) Modular Thread Changes, Range..... 1 to 88 MM
Carriage Rapid Traverse............................ 220 IPM
Cross-Slide Rapid Traverse..................... 110 IPM
Weight Approximately.............................. 7600 LBS
F.O.B. OUR WAREHOUSE
Distance Between Centers: 84"
Swing Over Cross-Slide: 14.6"
Tailstock, Spindle Taper: #5 MT
Hole Thru Spindle: 5.5"
(21) Spindle Speeds, Range: 15 to 1400 RPM
Carriage Rapid Traverse: 220 IPM
Cross-Slide Rapid Traverse: 110 IPM
Weight Approximately: 7600 LBS