16" x 72" CINCINNATI-MILACRON "ER" HYDRAULIC CYLINDRICAL GRINDER w/INTERNAL ATTACHMENT

16" x 72" CINCINNATI-MILACRON UNIVERSAL 

 CYLINDRICAL GRINDER W/INTERNAL ATTACHMENT

Serial No 3U5F1P-8, Ltr ER,

EQUIPPED WITH:

Internal Grinding Spindle Attachment (Swing-Down Type)

Hydraulic Longitudinal Table Feed

3/4 HP Variable Speed Workhead

Tailstock (Lever & Screw Type)

Automatic Pick-Feed

Coolant System (Built-In)

CATALOG SPECIFICATIONS:

Swing Over Table, Maximum 16.9375"

Grinding Diameter, Minimum 0"

Grinding Diameter, Maximum 16"

Distance Between Centers, Nominal 72"

Grinding Wheel Diameter, Standard 14"

Grinding Wheel Width, Standard 2"

Grinding Wheel Hole Diameter 5"

Table Swivel Taper Forward 3" TPF

Table Swivel Taper Back 1" TPF

Table Swivel Angle Forward 7-DEGREES

Table Swivel Angle Back 2-DEGREES

Headstock Swivel Forward 90-DEGREES

Headstock Swivel Back 30-DEGREES

Workhead and Tailstock Center Tapers #10 B&S

Workhead Spindle Speeds, Range 25 to 225 RPM

Table Longitudinal Feeds, Infinite 3 to 240 IPM

Automatic In-Feed at Table Reversal .0004 to .014 IPR

Grinding Wheelhead Spindle Motor 5 HP/1740 RPM

Internal Grinding Attachment, HP 2 HP

Hydraulic Motor, Horsepower 1.5 HP

Workhead Motor, Horsepower 3/4 HP

Floor Space Required, L x D 19'9" x 5'9"

Weight, Approximately 12500 LBS

F.O.B. OUR WAREHOUSE