20/27.5” x 100” VICTOR FORTUNE “S20100” GAP-TYPE ENGINE LATHE W/INCH-METRIC THREADING - 3.125" Hole
Have one to sell?
ConditionUsed
1 available
$7,950.00 USD
20/27.5” x 100” VICTOR FORTUNE “S20100” GAP-TYPE ENGINE LATHE - Inch/Metric Threading - 3.125" Hole Thru Spindle - (2) Steady Rests - Follow Rest - Chuck - Tool Post - Tool Holders - 10 HP Motor
20/27.5" x 100" VICTOR FORTUNE "PRECISION HIGH SPEED"
GAP-TYPE ENGINE LATHE w/DIGITAL READOUTS
Serial No 712201, Model S20100,
EQUIPPED WITH:
Newall C80 Digital Readouts
12" 3-Jaw Chuck w/Jaws
Camlock D1-8 Spindle Nose
Hardened & Ground Bed Ways
Inch/Metric Threading
(2) Steady Rests - (1) Follow Rest
Tool Post - Some Tool Holders
Coolant System (Built-In)
CATALOG SPECIFICATIONS:
Hole Thru Spindle 3.125"
Swing Over Bed Ways 20"
Swing thru Gap 27.5"
Swing Over Saddle 11.5"
Distance Between Centers 100"
Spindle Nose D1-8 CAMLOCK
Tailstock, Spindle Taper #4 MT
(16) Spindle Speeds, Range 31 to 1500 RPM
Carriage Longitudinal Feeds .0008 to .0117 IPR
Cross-Slide Cross Feeds .0004 to .0054 IPR
Thread Changes, Range 4 to 56 TPI
Metric Thread Changes, Range 0.25 to 6 MM
Main Motor, Horsepower 10 HP
Weight, Approximately 5500 LBS
F.O.B. OUR WAREHOUSE
20/27.5” x 100” VICTOR FORTUNE “S20100” GAP-TYPE ENGINE LATHE - Inch/Metric Threading - 3.125" Hole Thru Spindle - (2) Steady Rests - Follow Rest - Chuck - Tool Post - Tool Holders - 10 HP Motor
Imperial
| Swing | 20" |
| Gap Swing | 27.5" |
| Centers | 100" |
| Spindle Bore | 3.125" |
| RPM | 1,500 RPM |
| Power | 10 hp |
| Weight | 5500 LBS |
20/27.5" x 100" VICTOR FORTUNE "PRECISION HIGH SPEED"
GAP-TYPE ENGINE LATHE w/DIGITAL READOUTS
Serial No 712201, Model S20100,
EQUIPPED WITH:
Newall C80 Digital Readouts
12" 3-Jaw Chuck w/Jaws
Camlock D1-8 Spindle Nose
Hardened & Ground Bed Ways
Inch/Metric Threading
(2) Steady Rests - (1) Follow Rest
Tool Post - Some Tool Holders
Coolant System (Built-In)
CATALOG SPECIFICATIONS:
Hole Thru Spindle 3.125"
Swing Over Bed Ways 20"
Swing thru Gap 27.5"
Swing Over Saddle 11.5"
Distance Between Centers 100"
Spindle Nose D1-8 CAMLOCK
Tailstock, Spindle Taper #4 MT
(16) Spindle Speeds, Range 31 to 1500 RPM
Carriage Longitudinal Feeds .0008 to .0117 IPR
Cross-Slide Cross Feeds .0004 to .0054 IPR
Thread Changes, Range 4 to 56 TPI
Metric Thread Changes, Range 0.25 to 6 MM
Main Motor, Horsepower 10 HP
Weight, Approximately 5500 LBS
F.O.B. OUR WAREHOUSE
We use cookies to improve your experience. Privacy Policy.