Equipment
Gear Machinery
Misc Gear Equipment
#520 GLEASON HYPOID BEVEL GEAR LAPPING MACHINE
Sold

#520 GLEASON HYPOID BEVEL GEAR LAPPING MACHINE

Misc Gear Equipment
Model:
520.0
Year:
1979
Stock #:
27692
#520 GLEASON HYPOID BEVEL GEAR LAPPING MACHINE SERIAL NO. 113803, NEW 1979, MODEL 520 SUITABLE FOR THE LAPPING OF SPIRAL BEVEL AND HYPOID GEARS WITH SHAFT ANGLES FROM 0 TO 180 UP TO 24" (609.6MM), AS WELL AS 90 SHAFT ANGLE GEARS UP TO 30" (762MM) IN DIAMETER. THE 520 SERIES MACHINE CAN ALSO HANDLE LAPPING OF PARALLEL AXIS SPUR AND HELICAL GEARS UP TO 24" (609.6MM) FEATURES / EQUIPMENT: STANDARD PINION SPINDLE BORE (NO. 39 TAPER) GEAR SPINDLE BORE (NO. 39 TAPER) HYDRAULIC CHUCKING FOR BOTH GEAR AND PINION SPINDLES W/DRAW-IN BARS AND NUTS, POWER SUPPLY & ACCUMULATOR POWER MOVEMENT OF DRIVE HEAD IN/OUT AUTOMATIC PRESET BACKLASH CONTROL (SPC) "SWING-PINION-CONE" LAPPING FEATURE OVERSIZE LAPPING GUARD TWO-SPEED 5/2.5 HP, 3-60-440, 1700/840 RPM MAIN MOTOR) EDDY CURRENT BRAKE FULL COMPLEMENT ELECTRICS (MOTORS/CONTROLS) PRICE: F.O.B. OUR WAREHOUSE Degree shaft angle: 30" (762MM) Maximum diameter, angular bevel: 24" (630MM) Maximum pinion diameter: 12" (304.8MM) Or below pinion spindle center: 6" (152MM) Shaft angle range: 0 TO 180 DEGREES Taper dia. at large end: 3.906" (99.218MM) Taper per foot: .60937" (15.478MM) Depth of taper: 3" (76.2MM) Main motor: 5 HP 1800 RPM Hydraulic pump motor: 3/4 HP 1800 RPM Lapping compound motor: 1/2 HP 1800 RPM Oscillating drive motor: 1/4 HP Floor space: 90"X 90"(2286X2286MM) Machine overall height: 72" (1829MM) Approx. net weight: 12,500 LBS(5,682 KGS)

#520 GLEASON HYPOID BEVEL GEAR LAPPING MACHINE
SERIAL NO. 113803, NEW 1979, MODEL 520
SUITABLE FOR THE LAPPING OF SPIRAL BEVEL AND HYPOID
GEARS WITH SHAFT ANGLES FROM 0 TO 180 UP TO 24"
(609.6MM), AS WELL AS 90 SHAFT ANGLE GEARS UP
TO 30" (762MM) IN DIAMETER. THE 520 SERIES
MACHINE CAN ALSO HANDLE LAPPING OF PARALLEL
AXIS SPUR AND HELICAL GEARS UP TO 24" (609.6MM)

FEATURES / EQUIPMENT:
STANDARD PINION SPINDLE BORE (NO. 39 TAPER)
GEAR SPINDLE BORE (NO. 39 TAPER)
HYDRAULIC CHUCKING FOR BOTH GEAR AND PINION SPINDLES
W/DRAW-IN BARS AND NUTS, POWER SUPPLY & ACCUMULATOR
POWER MOVEMENT OF DRIVE HEAD IN/OUT
AUTOMATIC PRESET BACKLASH CONTROL
(SPC) "SWING-PINION-CONE" LAPPING FEATURE
OVERSIZE LAPPING GUARD
TWO-SPEED 5/2.5 HP, 3-60-440, 1700/840 RPM MAIN MOTOR)
EDDY CURRENT BRAKE
FULL COMPLEMENT ELECTRICS (MOTORS/CONTROLS)

PRICE: F.O.B. OUR WAREHOUSE
Degree shaft angle: 30" (762MM)
Maximum diameter, angular bevel: 24" (630MM)
Maximum pinion diameter: 12" (304.8MM)
Or below pinion spindle center: 6" (152MM)
Shaft angle range: 0 TO 180 DEGREES
Taper dia. at large end: 3.906" (99.218MM)
Taper per foot: .60937" (15.478MM)
Depth of taper: 3" (76.2MM)
Main motor: 5 HP 1800 RPM
Hydraulic pump motor: 3/4 HP 1800 RPM
Lapping compound motor: 1/2 HP 1800 RPM
Oscillating drive motor: 1/4 HP
Floor space: 90"X 90"(2286X2286MM)
Machine overall height: 72" (1829MM)
Approx. net weight: 12,500 LBS(5,682 KGS)

We use cookies to improve your experience. Privacy Policy.

Accept