24.5" X 78" MONARCH "61" ENGINE LATHE

24.5" X 78" MONARCH ENGINE LATHE
SERIAL NO 43462AT, MODEL 61, CAT SIZE 16",

EQUIPPED WITH:
15" 4-JAW CHUCK W/JAWS
4-WAY TOOL POST
STEADY REST
THREADING DIAL
FLAME HARDENED BED WAYS
FULL LENGTH REMOVEABLE COOLANT-CHIP PAN

CATALOGUE SPECIFICATIONS:
Hole Thru Spindle...................... 1.56"
Swing Over Bed Ways, Rated............. 16"
Swing Over Bed Ways, Actual............ 24.5"
Swing Over Cross-Slide, Approximately 11"
Distance Between Centers............... 78"
Top-Slide Cross-Feed Travel............ 3.75"
Tailstock, Spindle Diameter............ 3.375"
Tailstock, Spindle Travel.............. 7"
(16) Spindle Speeds, Range............. 24 to 1000 RPM
(66) Carriage Longitudinal Feeds....... .0014 to .0841 IPR
(66) Thread Changes, Range............. 2 to 120 TPI
Floor Space Required, L x D............ 12'2" x 3'8"
Weight, Approximately.................. 10360 LBS

NOTE: This Lathe Was Originally Being Used As A Tracer Lathe.
The Tracing Equipment Has Been Removed However The
Cross-Slide Is Still The Tracer Design.

PRICE: F.O.B. OUR WAREHOUSE
Hole thru spindle: 1.56"
Swing over bed ways, rated: 16"
Swing over bed ways, actual: 24.5"
Distance between centers: 78"
Top-slide cross-feed travel: 3.75"
Tailstock, spindle diameter: 3.375"
Tailstock, spindle travel: 7"
(16) spindle speeds, range: 24 TO 1000 RPM
(66) carriage longitudinal feeds: .0014 TO .0841 IPR
(66) thread changes, range: 2 TO 120 TPI
Horsepower: 10 HP 1745 RPM
Voltage: 208/220/3/60
Floor space required, l x d: 12'2" X 3'8"
Weight, approximately: 10360 LBS
Swing over cross-slide: 11"