215-153 CINCINNATI-MILACRON "HYPOWERMATIC" HORIZONTAL-SPINDLE PRODUCTION MILL

#215-153 CINCINNATI-MILACRON "HYPOWERMATIC"
HORIZONTAL-SPINDLE PRODUCTION MILL
New 1977, Serial No 311320P77-0004, Model 215-153,
Ltr LR, Series "HIGHPOWERMATIC"

EQUIPPED WITH:
Pendant Controls
Coolant System (Built-In)

CATALOG SPECIFICATIONS:
Table Dimensions (Overall) W x L .......... 15" x 71"
Table Working Surface, W x L .......... 15" x 63"
Table Longitudinal Travel (X-Axis) .......... 36"
Spindle-Head Vertical Travel (Y-Axis) .......... 10"
Quill Cross Adjustment (Z-Axis) .......... 3"
Spindle-Center to Overarm Underside .......... 6.3"
Horizontal-Spindle C/L to Table, Min .......... 4"
Horizontal-Spindle C/L to Table, Max .......... 14"
Table-Center to Spindle-Carrier .......... 11"
Table-Center to Spindle-Face, Minimum .......... 7"
Table-Center to Spindle-Face, Maximum .......... 10"
Quill Diameter .......... 7"
Spindle Nose Diameter .......... 5.06"
Spindle Taper .......... #50 NSTD
(16) Spindle Speeds, Range .......... 50 to 2000 RPM
Longitudinal Table Feeds, Range .......... 1 to 150 IPM
Power Rapid Table Traverse .......... 300 IPM
Spindle Motor, Horsepower .......... 15 HP/1775 RPM
Feed Drive Motor, Horsepower .......... 5 HP
Floor Space Required, L x D .......... 10'3" x 7'7"
Overall Height .......... 5'2"
Electrical System .......... 230-460/3/60
Weight, Approximately .......... 11300 LBS
F.O.B. OUR WAREHOUSE
Overall Height: 5'2"
Electrical System: 230-460/3/60
Weight, Approximately: 11300 LBS
Table Longitudinal Travel (X-Axis): 36"
Spindle-Head Vertical Travel (Y-Axis): 10"
Quill Cross Adjustment (Z-Axis): 3"
Spindle-Center to Overarm Underside: 6.3"
Table-Center to Spindle-Carrier: 11"
Table-Center to Spindle-Face, Minimum: 7"
Table-Center to Spindle-Face, Maximum: 10"
Quill Diameter: 7"
Spindle Nose Diameter: 5.06"
Spindle Taper: #50 NSTD
(16) Spindle Speeds, Range: 50 to 2000 RPM
Longitudinal Table Feeds, Range: 1 to 150 IPM
Power Rapid Table Traverse: 300 IPM
Spindle Motor, Horsepower: 15 HP/1775 RPM
Feed Drive Motor, Horsepower: 5 HP
Table Dimensions (Overall) W x L: 15" x 71"
Table Working Surface, W x L: 15" x 63"