12" X 24" OKAMOTO "ACCUGAR 124N" HYDRAULIC HORIZONTAL-SPINDLE SURFACE GRINDER

12" X 24" OKAMOTO "ACCUGAR" HYDRAULIC
HORIZONTAL-SPINDLE SURFACE GRINDER
Serial No 6018, Model 124N, Series "ACCUGAR"

EQUIPPED WITH:
12" x 24" Electro-Magnetic Chuck
w/Variable Automatic Neutrofier
Automatic Incremental Power Down Feed
Automatic Grinding Cycle --- Power Head Elevation
Automatic Cross Feed Reversal --- Coolant System
Plunge Grinding Capabilities
Coolant System

CATALOG SPECIFICATIONS:
Table Working Surface, W x L .......... 12" x 24"
Grinding Width Capacity, Maximum .......... 12"
Grinding Length Capacity, Maximum .......... 24"
Height Under 12" Grinding Wheel .......... 13.7"
Table Longitudinal Travel .......... 29.5"
Table Cross Travel .......... 13.4"
Table Longitudinal Feeds, Range .......... 1 to 100 FPM
Table Cross In-Feeds, Range .......... .02 to .8 IPR
Spindle Vertical Feeds, Range .......... .0001 to .0015 IPR
Power Rapid Vertical Traverse .......... 19 IPM
Grinding Wheel Spindle Motor .......... 5 HP/1730 RPM
Hydraulic System Motor .......... 2 HP
Power Elevation Motor .......... 1/2 HP
Electrical System .......... 230-460/3/60
Floor Space Required, L x D 8'7" x 6'2"
Overall Height 6'1"
Weight, Approximately 4900 LBS

NOTE: This Machine Is Missing The Wheel Mount.
Grinding Width Capacity, Maximum: 12"
Grinding Length Capacity, Maximum: 24"
Table Longitudinal Travel: 29.5"
Table Cross Travel: 13.4"
Table Longitudinal Feeds, Range: 1 to 100 FPM
Table Cross In-Feeds, Range: 02 to .8 IPR
Spindle Vertical Feeds, Range: 0001 to .0015 IPR
Power Rapid Vertical Traverse: 19 IPM
Grinding Wheel Spindle Motor: 5 HP/1730 RPM
Hydraulic System Motor: 2 HP
Power Elevation Motor: 1/2 HP
Electrical System: 230-460/3/60