18" x 40" SOUTHWESTERN INDUSTRIES (SWI) "TRAK TRL 1840CSS" FLAT BED CNC/MANUAL ENGINE LATHE

18" X 40" SOUTHWEST INDUSTRIES (SWI) FLAT-BED CNC/MANUAL ENGINE LATHE
Serial No. 98-8010, Updated 2014, Model TRAK TRL1840CSS

EQUIPPED WITH:
ProtoTRAK LX3 CNC Control (Updated 2014)
3-Jaw Chuck w/Jaws - Tool Post
Hardened & Ground Ways
Coolant System

CATALOG SPECIFICATIONS:
Spindle Bore Diameter .......... 2.36"
Swing Over Bed, Maximum .......... 18.5"
Distance Between Centers, Maximum .......... 40"
Swing Over Saddle Wings, Maximum .......... 17"
Swing Over Cross Slide, Maximum .......... 9.0"
Cross Travel, X Axis .......... 13"
Tailstock Quill Travel .......... 6.3"
Tailstock Quill Diameter .......... 2.95"
Tailstock Quill Taper .......... 5 MT
Spindle Speeds, Range .......... 50 to 2500 RPM
Spindle Nose .......... CAMLOCK D1-6"
Spindle Motor, Horsepower .......... 10 HP
Floor Space Required, L x D .......... 113" x 53"
Overall Height .......... 67"
Weight, Approximately .......... 4500 LBS

Note: The TRAK TRL1840CSS lathe may be used as a
conventional (manual) lathe utilizing handwheels.
F.O.B. ON WAY IN
Spindle Bore Diameter: 2.36"
Swing Over Bed, Maximum: 18.5"
Distance Between Centers, Maximum: 40"
Cross Travel, X Axis: 13"
Tailstock Quill Travel: 6.3"
Tailstock Quill Diameter: 2.95"
Tailstock Quill Taper: 5 MT
Spindle Speeds, Range: 50 to 2500 RPM
Spindle Nose: CAMLOCK D1-6"
Spindle Motor, Horsepower: 10 HP
Overall Height: 67"
Weight, Approximately: 4500 LBS