12" x 25" KENT "KGS-360AHD" AUTOMATIC HYDRAULIC HORIZONTAL-SPINDLE SURFACE GRINDER

12" x 25" KENT FULLY-AUTOMATIC HYDRAULIC-FEED
HORIZONTAL-SPINDLE SURFACE GRINDER
Serial No 86050503, Model KGS360AHD,

EQUIPPED WITH:
12" x 24" Electro-Magnetic Chuck
Incremental Power Down Feed
Coolant System (Tank & Pump)

CATALOG SPECIFICATIONS:
Surface Ground Maximum, W x L .......... 12.62" x 25.5"
Grinding Width Capacity, Maximum .......... 12.62"
Grinding Length Capacity, Maximum .......... 25.5"
Spindle Center to Table, Maximum .......... 19.62"
Grinding Wheel Diameter, Standard .......... 14"
Grinding Wheel Width, Standard .......... 1.5"
Grinding Wheel Hole Diameter .......... 5"
Spindle Speed .......... 1740 RPM
Table Speed, Variable .......... 6.5 to 72 FPM
Incremental Downfeed, Range .......... .0002 to .002 IPR
Incremental Crossfeed, Range .......... .001 to .6 IPR
Head Elevation, Speed .......... 9 IPM
Spindle Motor Horsepower .......... 5 HP
Hydraulic System Motor .......... 2 HP
Floor Space Required, L x W .......... 109" x 81"
Weight, Approximately .......... 4650 LBS
F.O.B. ON WAY IN
Grinding Width Capacity, Maximum: 12.62"
Grinding Length Capacity, Maximum: 25.5"
Grinding Wheel Diameter, Standard: 14"
Grinding Wheel Width, Standard: 1.5"
Grinding Wheel Hole Diameter: 5"
Spindle Speed: 1740 RPM
Table Speed, Variable: 6.5 to 72 FPM
Incremental Downfeed, Range: 0002 to .002 IPR
Incremental Crossfeed, Range: 001 to .6 IPR
Head Elevation, Speed: 9 IPM
Spindle Motor Horsepower: 5 HP
Hydraulic System Motor: 2 HP
Weight, Approximately: 4650 LBS