6" HINES "600 NC" HYDRAULIC TUBE BENDER W/TOOLING

6" HINES "600 N/C" (CNC) HYDRAULIC TUBE BENDER
New 2005, Serial No 11082005-5, Model 600 NC

EQUIPPED WITH:
PLC Controller w/Touch Screen & 100 Job Storage
Capacity, 6 Bends Per Part
Mandrel Extractor
Overhead Tie Bar
Swing-Away Wiper Die Holder
Clockwise Rotation
Tube Piece Counter

Large Quantity Of Tooling & Dies:
11 Dies Include: 4" OD CLR 4.0, 2.5" OD CLR 3.75,
3" OD CLR 3.0, 2" OD CLR 3, 3" OD CLR 4.5,
5" RAD, 3.5" On Machine, 3" Die, 4.5" Die, And
(2) 5" Dies

CATALOG SPECIFICATIONS:
Tube Capacity @ .200 Wall Thickness .......... 6"
Bend Radius, Maximum .......... 18"
Bend Angle, Maximum .......... 190-DEGREES
Bend Arm Speed .......... 0.4 RPM
Tube Length Over the Mandrel, Max .......... 168"
Hydraulic Reservoir Capacity .......... 275 GALLONS
Operating Pressure .......... 2300 PSI
Motor Horsepower .......... 30 HP
Overall Dimensions, L x W .......... 19' x 7'
Overall Height .......... 5.5'
Weight Approximately .......... 23000 LBS
F.O.B. OUR WAREHOUSE
Bend Radius, Maximum: 18"
Bend Angle, Maximum: 190-DEGREES
Bend Arm Speed: 0.4 RPM
Hydraulic Reservoir Capacity: 275 GALLONS
Operating Pressure: 2300 PSI
Motor Horsepower: 30 HP
Overall Height: 5.5'
Weight Approximately: 23000 LBS