30/39" x 120" SUMMIT "30-9X120" BIG HOLE DUAL-CHUCK GAP-TYPE ENGINE LATHE w/TAPER & DRO

30"/39" x 120" SUMMIT "BIG HOLE" DUAL-CHUCK
GAP-TYPE ENGINE LATHE w/TAPER ATTACHMENT
& DIGITAL READOUTS
New 2012, Serial No 12055, Model 30-9X120

EQUIPPED WITH:
9.1" Spindle Bore Diameter - A2-15 Spindle Nose
(2) 25" Bison Front & Rear Oil Country Chucks w/Jaws
Fagor "Innova" Digital Readouts
Taper Attachment - Dorian Quick Change Tool Post
Threading (Inch-Metric Full-Length Lead Screw)
Power Rapid Traverse - Two Speed Tailstock
Induction Hardened And Ground Bed Ways
Coolant System

CATALOG SPECIFICATIONS:
Hole Thru Spindle .......... 9.1"
Swing Over Bed Ways, Rated .......... 30.5"
Swing thru Gap .......... 39"
Gap Length .......... 18"
Swing Over Cross-Slide .......... 22"
Distance Between Centers .......... 120"
Cross-Slide Cross-Feed Travel .......... 15.5"
Compound Rest Travel .......... 9"
(12) Spindle Speeds, Range .......... 11 to 700 RPM
(36) Carriage Longitudinal Feeds .......... .0019 to .0276 IPR
(36) Cross-Slide Cross Feeds .......... .0009 to .0137 IPR
(36) Thread Changes, Range .......... 2 to 28 TPI
(65) Metric Thread Changes, Range .......... .08 to 14MM
(22) Module Threads, Range .......... .5 to 7
(36) Diametral Pitch, Range .......... 4 to 56 DP
Tailstock Spindle Travel .......... 9"
Tailstock Spindle Center .......... 5 MT
Motor, Horsepower .......... 20 HP
Electrical System .......... 220-440/60
Overall Dimensions, L x W .......... 204" x 54"
Overall Height .......... 66"
Weight Approximately .......... 9750 LBS
F.O.B. ON WAY IN
Hole Thru Spindle: 9"
Swing thru Gap: 39"
Gap Length: 18"
Swing Over Cross-Slide: 22"
Distance Between Centers: 120"
Cross-Slide Cross-Feed Travel: 15.5"
Compound Rest Travel: 9"
(12) Spindle Speeds, Range: 11 to 700 RPM
(36) Carriage Longitudinal Feeds: 0019 to .0276 IPR
(36) Cross-Slide Cross Feeds: 0009 to .0137 IPR
(36) Thread Changes, Range: 2 to 28 TPI
(22) Module Threads, Range: 5 to 7
(36) Diametral Pitch, Range: 4 to 56 DP
Rapid Traverse Rate: 160 IPM
Tailstock Spindle Travel: 9.5"
Tailstock Spindle Center: 5 MT
Motor, Horsepower: 20 HP
Electrical System: 220-440/60
Overall Height: 64"
Weight Approximately: 13000 LBS