35D-Z2 SEVEN METAL CORP "EDM DRILLMATE" EDM DRILL

35D-Z2 SEVEN METAL CORP "EDM DRILLMATE" EDM DRILL
Serial No 35-DSRZ2P602, Model EDM DRILLMATE

EQUIPPED WITH:
Seven Metal Corp Digital Readouts
Dielectric Water System w/Pump
Miscellaneous Tooling

CATALOG SPECIFICATIONS:
Hole Diameter, Range .008" to .125"
Hole Diameter, Range .2MM to 3 MM
Worktable Dimensions, L x W 33.5" x 18"
Table Travel, X-Axis 13.7"
Table Travel, Y-Axis 9.8"
Z-Motor Axis Travel w/Chuck 13.5"
Electro-Guide Travel 6"
Work Tank Dimensions 33.5" x 18"
Workpiece Height, Maximum 14"
Workpiece Weight, Maximum 500 LBS
Ram to Table, Minimum .375"
Power Backslide 7.8"
Water Reservoir Capacity 5 GALLONS
Overall Dimensions, W x D 40" x 36"
Overall Height 85"
Weight Approximately 2060 LBS

NOTE: This Machine Was Designed As An EDM Drill
With The Ability To Produce An Eroded Hole In Any
Material That Is Conductive To Electric. Holes Can
Be Produced In Diameters From .008" to .125".
The Advantages Of Using This Method Include
The Ability To Drill Hardened Materials And Machine
In Or About Difficult Geometric Shapes. Because
Pure Water Is Used As A Dielectric And The Material
Is Melted Rather Than Cut The Need For Secondary
Operations Is Reduced.
F.O.B. OUR WAREHOUSE