BMC-40 HURCO 3-AXIS BED-TYPE CNC VERTICAL MACHINING CENTER w/HURCO DUAL SCREEN CONTROL & 30-POSITION AUTOMATIC TOOL CHANGER
Have one to sell?
ConditionUsed
1 available
$3,000.00 USD
BMC-40 HURCO 3-AXIS BED-TYPE CNC
VERTICAL MACHINING CENTER
Serial No ZE-9004033, Model BMC-40,
BMC-40 HURCO 3-AXIS BED-TYPE CNC
VERTICAL MACHINING CENTER
Serial No ZE-9004033, Model BMC-40,
EQUIPPED WITH:
Hurco "Ultimax 3" CNC Control w/Dual Screen
30-Position Automatic Tool Changer
Full Chip and Coolant Enclosure
CATALOG SPECIFICATIONS:
Table Working Surface, W x L 27.6" X 51.2"
Table Overall Dimensions, W x L 34.3" x 51.2"
Table Working Load Capacity 3300 LBS
Table Longitudinal Travel, (X-Axis) 40"
Table In/Out Cross Travel, (Y-Axis) 30"
Spindle-Head Vertical Travel, (Z-Axis) 22"
Nose to Table, Minimum 6.2"
Nose to Table, Maximum 28.2"
Distance Center-To-Column Ways 20.5"
Distance Center-To-Throat 34.3"
Spindle Taper #40 CAT V-FLANGE
Spindle Speeds, Range 40 TO 4000 RPM
Cutting Feed Rate, Range 0.1 to 150 IPM
Power Rapid Traverse Rate, X, Y, & Z 400 IPM
Spindle Motor Horsepower 15 HP
Weight Approximately 17500 LBS
NOTE: THIS MACHINE HAS A BAD AXIS DRIVE. WE ARE SELLING AS IS.
F.O.B. OUR WAREHOUSE
BMC-40 HURCO 3-AXIS BED-TYPE CNC
VERTICAL MACHINING CENTER
Serial No ZE-9004033, Model BMC-40,
Imperial
| X | 40" |
| Y | 30" |
| Z | 22" |
| Power | 15 hp |
| RPM | 4,000 RPM |
| # ATC | 30 |
| Taper | #40 CAT V-FLANGE |
| Table-W | 27.6" |
| Table-L | 51.2" |
| # Axis | 3 |
| Dimensions | 34.3In X 51.2In |
| Weight | 17500 |
BMC-40 HURCO 3-AXIS BED-TYPE CNC
VERTICAL MACHINING CENTER
Serial No ZE-9004033, Model BMC-40,
EQUIPPED WITH:
Hurco "Ultimax 3" CNC Control w/Dual Screen
30-Position Automatic Tool Changer
Full Chip and Coolant Enclosure
CATALOG SPECIFICATIONS:
Table Working Surface, W x L 27.6" X 51.2"
Table Overall Dimensions, W x L 34.3" x 51.2"
Table Working Load Capacity 3300 LBS
Table Longitudinal Travel, (X-Axis) 40"
Table In/Out Cross Travel, (Y-Axis) 30"
Spindle-Head Vertical Travel, (Z-Axis) 22"
Nose to Table, Minimum 6.2"
Nose to Table, Maximum 28.2"
Distance Center-To-Column Ways 20.5"
Distance Center-To-Throat 34.3"
Spindle Taper #40 CAT V-FLANGE
Spindle Speeds, Range 40 TO 4000 RPM
Cutting Feed Rate, Range 0.1 to 150 IPM
Power Rapid Traverse Rate, X, Y, & Z 400 IPM
Spindle Motor Horsepower 15 HP
Weight Approximately 17500 LBS
NOTE: THIS MACHINE HAS A BAD AXIS DRIVE. WE ARE SELLING AS IS.
F.O.B. OUR WAREHOUSE
We use cookies to improve your experience. Privacy Policy.