15" x 40" SUPERTEC "STG-38-100CII" UNIVERSAL CYLINDRICAL GRINDER W/SWING-DOWN INTERNAL GRINDING ATTACHMENT

15" X 40" SUPERTEC UNIVERSAL CYLINDRICAL
GRINDER W/SWING-DOWN INTERNAL
New 2005, Serial No. GC05001, Model STG-38-100CII

EQUIPPED WITH:
Mitsubishi PLC Control w/Sony "LG10" DRO
Automatic Incremental Wheelhead Infeed
Combination Live/Dead Spindle Vari-Speed Workhead
Heavy-Ribbed Box-Type Meehanite Caste Base
Automatic Lubrication System
Table Mounted Wheel Dresser
Steady Rest - 8" 4-Jaw Chuck
Uni-Magnetic PFA-60 Coolant Filtration System
(Serial No M9301407, 60 L/MIN)

CATALOG SPECIFICATIONS:
Swing Over Table, Maximum .......... 15"
Grinding Diameter, Maximum .......... 14"
Distance Between Centers, Maximum .......... 40"
Weight Capacity Between Centers .......... 330 LBS
Grinding Wheel, Standard Diameter .......... 16"
Grinding Wheel, Width .......... 2"
Grinding Wheel, Hole Diameter .......... 5"
Grinding Wheel Speeds .......... 1650 RPM
Workhead Spindle Speeds .......... 30 to 350 RPM
Longitudinal Table Feeds, Infinite .......... 1.2 to 275 IPM
Wheelhead Automatic Incremental Feed .......... .0001 to .0999"
Table Swivel Angle Range .......... +/- 9 DEGREES
Workhead Swivel Angle, Range .......... 90-DEGREES
Workhead & Tailstock Spindle Taper .......... 4 MT
Wheelhead Motor, Horsepower .......... 7.5 HP
Workhead Motor, Horsepower .......... 2 HP
Internal Grinding Motor, Horsepower .......... 2 HP
Electrical System .......... 230/3/60
Overall Dimensions, L x W 119" x 90"
Overall Height 79"
Weight, Approximately 10340 LBS
F.O.B. OUR WAREHOUSE
Swing Over Table, Maximum: 15"
Grinding Diameter, Maximum: 14"
Distance Between Centers, Maximum: 40"
Weight Capacity Between Centers: 330 LBS
Grinding Wheel, Standard Diameter: 16"
Grinding Wheel, Width: 2"
Grinding Wheel, Hole Diameter: 5"
Grinding Wheel Speeds: 1650 RPM
Workhead Spindle Speeds: 30 to 350 RPM
Longitudinal Table Feeds, Infinite: 1.2 to 275 IPM
Wheelhead Automatic Incremental Feed: 0001 to .0999"
Table Swivel Angle Range: +/- 9 DEGREES
Workhead Swivel Angle, Range: 90-DEGREES
Wheelhead Motor, Horsepower: 7.5 HP
Workhead Motor, Horsepower: 2 HP
Internal Grinding Motor, Horsepower: 2 HP
Electrical System: 230/3/60